Tag Archives: delay

Timing is everything: Long waits and perfect delays

At the very end of 2013, (seriously, it was December 30 at about 8pm), I bought my first-ever, brand new car, right off the lot. It was nothing fancy- a Kia Forte, basically Kia’s version of a Civic. It had lots of cool options, and I felt very modern. I was “new car guy.”

Image result for new car guy

O N E   Y E A R    L A T E R . . .

The day before Christmas Eve on 2014, I was driving to a music rehearsal, when a dump truck ran a red light as I was making a left turn (I had the arrow). He hit the passenger’s-side front corner of the Forte, which, thanks to wet pavement, spun right out of way. I was completely unharmed. My slightly-less-than-a-year-old Forte, however, was destroyed.

After this, I was “Rental Car Guy” for rather a long time.

I decided to celebrate my survival on December 26 by a shopping trip to Guitar Center.

Image result for guitar center Image result for guitar center

I bought a TC Electronic Flashback Triple Delay. For ages, I had been using three Boss DD-5 delays, sync’ing them with a single tap-tempo pedal and a custom-soldered splitter cable connected to all three delays.

s DD5 delay-array

“Dave’s Delay Array” ™ utilizing three Boss DD-5′s. 

Over the years, I bemoaned that NO ONE made a multi-delay unit that was as “Live-Friendly” as this DDA (“Dave’s Delay Array”) that I had invented / discovered. I have written about this in a prior blog post, here: http://www.davideberhardt.com/wp/?p=73

Totally smitten with the TCE delay (or at least with the idea of it), I got right to work, dialing-in my sounds, saving patches, and even writing a glowing review. It was after 11pm, as I was AT LEAST a page deep in my delighted document, that I realized I hadn’t actually checked the obvious functions on how the tap-tempo worked. It was such a foregone conclusion, but I felt I really should just make sure that I hadn’t overlooked such an obvious…

Image result for fail

A simple Google search on the Triple Delay and “global tap” will yield THOUSANDS of results of horrified dismay from consumers, and a smug “we-know-what-we’re-doing-and-you-must-be-stupid” response from TCE. In short, each delay (remember there are three of them) had to be ON before the tap-tempo would work. That means you have to tap tempo over and over and over if you want to use different delay settings within a song.

Intolerable!

Much like my ill-fated Kia Forte, my dream of owning a single multiple-delay pedal (with specific features) was shattered. Utterly disgusted, I returned it the next day. The poor GC employee had no idea what I was talking about, and frankly, I’m tired of trying to explain music gear to people whose job it is to know these things.

Image result for return

The TC Electronic Triple Delay’s tap-tempo is a design-failure of remarkable proportions, combined with a corporate hubris that needs to die. Working musicians are weary to the point of hostility toward music-gear manufacturers who flood the market with crap no one wants (“another Tube Screamer variant!”), not listening to what real musicians need, or making themselves available to field questions or suggestions.

Image result for not listening

TCE had asked for design suggestions, got them, and then ignored them in favor of what they perceived would sell better. They were dead wrong, and like me, delay-freaks all over the world either returned their Triple Delays or sold them on eBay. This one feature, specifically requested by delay users, was discarded by TCE. They could have made the Triple Delay THE STANDARD (which, after sixteen years, might STILL be the Line 6 DL-4).

Image result for line6 dl4

The Line 6 DL-4 Delay Modeler is used everywhere, by everyone. I might be exaggerating, but not by much.

I really like the Line 6 DL-4, and have had mine since they first came out. Sadly, it only allows you to use ONE of its patches at a time, and it saves your last tempo in the patch you save. That means that every time you turn on, say, patch #3, you will have to tap a tempo in to get it to match the song, unless it just happens to match, or if you programmed it for that specific tempo on purpose. The TCE Triple Delay operates the same way, except you can use multiple delay patches simultaneously.

If you Googled the issue, you probably saw people begging for a fix that never came. Many (myself included) opted to wait for an update, upgrade, or 2nd-gen release. It’s been three years, and nothing.

Well, there’s good news and bad news here.

The Triple Delay CAN be used in the way most delay geeks would desire, BUT it requires MIDI to control it. In general, I think this is foolish and unnecessarily complicated, but there is a solution.

Image result for hope lives

 

Disaster Area Designs (http://www.disasterareaamps.com/) makes a “SMARTClock” MIDI tap-tempo pedal, that will do the job. Sadly, it costs about $200 to get it to your address ($179 plus tax & shipping). The good news is that it does a lot of other useful functions (for instance, can be used as an analog tap-tempo pedal as well).

Image result for disaster area smartclock

I picked up a used TCE Triple Delay and ordered that SMARTClock pedal, both of which arrived within a few days of one another. Adding power and a MIDI cable is a snap. Both run on standard 9v barrel-style power connectors. In no time at all, I had recreated my basic DD-5 setup, and was doing synchronized stacked delays with better converters, two fewer conversions and fewer patch-cables.

Image result for excellent

The Triple Delay is slightly smaller than a Line 6 DL-4, and doesn’t have weird contours. It’s nicely rectangular.

Image result for triple delay

Its delay sounds are not as exciting as a DL-4, which features lots of novelty sounds (I have always loved the DL-4 “Sweep” and “Lo-Fi” delays, and could coax a convincing Leslie out of the “Analog /w Mod”), but it has much better clarity and fidelity in a mix. My decades of live delay use has taught me that subtle delays are a waste of time. You either hear a clear echo, or you hear mud. My EXTENSIVE prior use of the DDA (that’s “Dave’s Delay Array,” utilizing Boss DD-5′s) gave me plenty of clarity, but there was no option to tame it. Ever. Now I have some flavors, without loss of clarity.

Is there a product you’ve been waiting to see? Is there a multi-delay that you swear by? Have you ever used a DDA (“Dave’s Delay Array”)? What about manufacturers? Is anyone out there listening? I’m listening. Tell me your story.

Sprechen!

How to Get Perfect Stacked Delays on a Musician’s Budget.

 

The “DDA” (“Dave’s Delay Array”)

Developed circa 2002, by Dave Eberhardt.

In the mid-90′s, I bought my first Boss DD-5 Digital Delay which finally allowed me to have a portable tap-tempo delay.

Up until that point, my only tap delay was a Lexicon JamMan rackmount delay/sampler. Over the years, I tried combining lots of different delays, and spent a lot of time tapping and switching and generally being miserable.

Image result for lexicon jamman

 

 A few years later, the DD-6 promised some new features, so I bought one. Immediately I discovered that I couldn’t use it the way I liked, and I sold it. But as I was trying to come up with a graceful way to synchronize and cascade my delays, it hit me like a thunderbolt one afternoon in my basement:

I could split the tap-tempo footswitch cable, and trigger TWO DD-5′s!

Image result for lightning strikes guy

Well, I got a second DD-5, did a little splicing and soldering, and it worked perfectly. Later I added a third DD-5. This has been my delay rig now for nearly fifteen years. Only recently has anyone produced a synchronized tap delay that works as well as several DD-5′s.

Note: Boss’ DD-7 will work the same way as the DD-5. It offers more options, but I don’t think it has as much clarity as the DD-5. Just my opinion.

 

What I like about the DD-5 and DD-7 are these three features:

  1. Each pedal is always listening to the tap, even when it is bypassed.
  2. Echoes decay naturally when the pedal is bypassed.
  3. Can be connected to a common tap pedal.

 

With the DD-5′s, I can be just playing along with the band and tapping my foot. As soon as I step on the delay pedal, the echo of each is in perfect sync, and they are all in perfect sync together! You want that U2 thing? Simple. Want big swimmy volume-swells? Done. At present, the only modern units that offer the same grace of live operation are the Line 6 M9 and the TC Electronic Flashback Triple Delay. Those have some negative details that I will save for another time.

In any case, here’s how to make the DDA (“Dave’s Delay Array”). Wiring will require the sacrifice of a few cables, or the creation of some new ones. I like to connect the tap-tempo input cables to the DD-5′s with right-angle jacks like these:

You can use a special tap-tempo pedal, but any momentary-interrupt, non-latching footswitch will work. I like to use those simple sustain pedals that get used with keyboards. They tend to be quiet and durable. I don’t like my audience to hear my foot going ker-chunk, ker-chunk, ker-chunk…

Image result for jackhammer

Anyway, strip the cable’s black outer covering down to expose the two wires inside. In my diagram, I have colored them red and yellow, but they may be any two colors. Strip the colored covering down to expose the bare wires. Lightly braid the respective wires going to each DD-5 together, red and red, yellow and yellow.

Now expose the wires on the tap-tempo footswitch cable the same way, and lightly connect it to the braided DD-5 wires. Connect power and audio, and test to see if it works. If neither delay syncs to your tap, switch the wires on the tap cable. Once it works, make the connections permanent, wither with connectors or by soldering. Don’t leave the bare wires exposed. I use heat-shrink tubing and/or tape. Make sure that the separate wire connections don’t touch each other (keep the red away from the yellows), or it will short out the connection (this isn’t harmful, but it just won’t work).I bend the reds to one end of the cable, and the yellows to the other end.

It may take you a few attempts to get it all laid-out and connected the way you want. Experienced solderers can do this kind of work in a few minutes. The good news is that you can start with two delays and add a third. This is how mine are connected.

s DD5 delay-array

Connect all the yellow wires together, and then all the red wires together. Don’t let the reds tough the yellows! And again, these may not be the wire-colors you see.

This is my actual pedalboard. You can see that I marked each DD-5 with the beat-value of each echo. Oh, by the way, that’s correction fluid (“Wite Out”) on black gaffer’s tape. I usually cover manufacturer names and logos. It’s MY pedal now.

IMAG2431

Oh yeah. That VS-XO is a recent addition. I will be doing a demo and review of it later :)

For the record, this is basically what I used for all of my live gigs with the Katie Reider Band, Crossroads, everyone I worked with at Blue Jordan records, sub dates, The Mood Rings, Horizon, etc.  I hope the DDA works well for you, saves you money and headaches, and gets you the same kind of easy sonic victory that it has for me. Best of luck!

Got any other cool delay ideas? I’d love to hear them. Feel free to ask me for more details on the DDA. Remember, that’s “DAVE’s Delay Array.”

 

All information herein © 2016. You may use it and share it, just document where you heard it first. :)

 

 

 

Product Review: Tech 21 FlyRig RK5

Review of the Tech 21 FlyRig RK5, by Dave Eberhardt

First off, I recorded a demo of the FlyRig RK5, which you can check out, here: https://youtu.be/vzaO05Kvlvs

Tech 21 has produced several items which I like very much. The original SansAmp has shown up on a many of the recordings I’ve made (I’ll bet you a sandwich you can’t identify which ones), and I liked the Bass Driver preamp on my bass so much that I bought an RBI to keep in my studio rack.

The original FlyRig seemed like such a great idea when I first discovered it, and the RK version had the sort of gain I really like, so I jumped on it. The SansAmp section, reverb and DLA (delay) are the same in both models, so the only difference is the OMG gain in the RK version, versus the PLEXI gain in the original.

First reactions: The FlyRig box is surprisingly tiny, and so I was even more surprised at how tiny the actual FlyRig actually is, inside it. Seriously, it’s the size of two cell phones end-to-end. It came with its own proprietary (and alarmingly flimsy) power supply. Sadly, this is not a standard 9v adapter, so you can’t add a FlyRig to an existing pedalboard daisy chain.

Sounds and features: By itself, the SansAmp section is glorious. It sounds like an amp, and responds like one. Tone controls are responsive and musical. The reverb is remarkable. Unfortunately, it isn’t foot-switchable. There’s no graceful way to deal with this on stage. Just don’t even try.

The OMG gain is fantastic, and interacts well with the SansAmp. Then the OMG boost sends it all into screaming rock Valhalla. Used without an amp, the SansAmp functions well as an amp-simulator, letting you boost it with the two stages of the OMG. With an amp, the SansAmp section can be used as its own boost/gain, and the OMG and its boost can be tweaked differently. So there are lots of gain combinations to explore.

The DLA section boasts a really nice-sounding tap delay, with the option to add a randomized modulation. Turning the delay-time all the way down allows the modulation to be used as a “secret” chorus. As a delay freak, I was disappointed that the only realistic use of the delay was tapped quarter notes (or 8th-notes if I double-timed it). If you want dotted-8th delays, you better be able to tap a beat-and-a-half. Lotsa luck with that. I was further disappointed (and really surprised) by the DLA noise floor.

Persnickety: There is a current trend to have footpedals color the clouds with their huge bright light shows. I hate this. When I perform, I want my pedal rig to be as unobtrusive as possible. The Flyrig lights up every knob in each section that’s enabled. I wish each function just had a single LED. If you like footlights, you may love it. Moreover, when powered-up, the whole unit -I mean, each section- defaults to being ON.

At the end of a few weeks of using it both live and in the studio, I found myself craving more options, or wishing I had just gotten an OMG pedal. To me, the unit doesn’t offer much that I don’t already have, and it’s tiny footprint (while impressive) isn’t enough of a perk to replace anything I already have.

I asked Tech 21 if the FlyRig could be modded with extra jacks (I was really interested in a send/return, perhaps on a single stereo jack), and was told that they couldn’t imagine such an option. In my experience, manufacturers are rarely imaginative in this regard.

Maybe someone else will mod their FlyRig, and I’ll revisit the option. Until then, I’d rather use something a little larger, quieter, and better-appointed

Pros: Compact, great amp-sim and gain stages.

Cons: Reverb isn’t switchable, delay is limited and noisy. Power supply is distressingly cheapo.

 

Have you tried one? What was your experience?